Our Cleaning Process
Pre-Anodize Clean
Any aluminium part that we anodize will go through our pre-anodize clean process which consists of a heavy degreaser, an etchant, and an acid rinse. This process will remove almost all macro contaminants.
Ultrasonic Clean
We have an ultrasonic rinse tank to remove entrapped particles from micro-holes as well as provide a very thorough general clean for a variety of parts for low particle count requirements
Chemical Cleaning
After extensive post anodize rinsing, parts can undergo micro contaminant cleaning via our chemical cleaning process in our Class 1000 clean room. If parts are to be subsequently clean room packaged they will often then be baked in our clean room oven to drive out moisture.
Clean Room Packaging
Post chemical cleaning, parts are then packaged in our class 100 packaging bench. Various packaging options are available such as poly and nylon bags, bulk packaging for reduced cost, double bagging and more.
Approved Lam Research Chemical Cleaning Specs
- 508-097925-001 Final Clean
- 74-106348-00 Novellus chemical clean and package
- 202-051274-001 TCP w/micro circuit cleaning
- 202-035416-001 New Aluminum parts cleaning
- 202-016976-001 Micro contamination specification
- 202-032459-001 Large parts cleaning
- 202-078779-001 TCP cleaning
- 202-048286-001 Precision clean of Aluminum
- 202-055007-001 Small parts
Approved Applied Materials Chemical Cleaning Specs
- 0250-30100 Cleaning Anodic coatings
- 0250-70351 Component cleaning
- 0250-20000 UHV clean components
- 0250-03038 replaced by 30100
- 0250-04004 Selective Nickel components
- 0250-04003 anodized components
- 0190-00144 Deep Clean